WHA

It takes about
20min
It costs about
3€
Difficulty
Low
License

Wall Hanger

BEFORE YOU START

By following the instructions below and/or downloading the linked files you agree to the specified license agreement.

Tools

3d printer

3d printer

Drill

Drill

Philips Head Screwdriver

Philips Head Screwdriver

Material

Raw Plug

Raw Plug

Wall Screw

Wall Screw

1 Overview

1.1. WHA - OVERVIEW

WHA - OVERVIEW

2 Printing

2.1. WHA Printing

After downloading the files (3D print section above), print the pieces with the following printing settings:

 

Nozzle: 0.4 mm
Material: PETG
Layer height: 0.2 mm
Perimeters: 3
Infill: 20%

WHA Printing

3 Preparation

3.1. WHA - PREPARING THE WALL

With the help of a drill and an 8mm drill bit, make a hole in the wall at the desidered lamp location.

 

Insert inside the previously drilled hole the raw plug.

WHA - PREPARING THE WALL

4 Assembly

4.1. WHA - ATTACHING THE SUPPORT

With the help of a screwdriver, pass a wall screw through the 3D printed screw and tighten it to the previously placed raw plug.

WHA - ATTACHING THE SUPPORT

4.2. Attaching to the wall

Screw the wall hanger to the previously fixed 3d printed wall screw.

Attaching to the wall

5 WHA is ready!

WHA